The Intervention Begins

At long last! I can finally start on the MG Cow w/ Turn A Gundam! This is going to be awesome as I’ve been looking forward to this day ever since picking this model up *zzz…* andd…no..now *zzz*.. wait, what’..s.. happ..*zz* ening..?! *zzz..*

IMG_6942

“Exia, intervening the target…”

30 Responses to “The Intervention Begins”

  1. Dredhawk Says:

    I wonder who would win in a Fight Turn A Gundam or Gundam Exia???? Turn A has Moonlight butterfly, Exia’s got Trans Am and 7 Swords .

  2. Siroh32 Says:

    I knew it, I knew you fell in love with the Exia MG after it’s many gadgets were shown. They had to show the gadgets well in advance to appease 00 fanboys to get it after they moped about its MG looks. :P
    Yeah, I know what you mentioned before. Well, if it actually is the best MG ever, I’ll consider getting it when I get around to watching Gundam 00 fiddling around with a Robot Damashii figure (if I get one by then).

    Dred, it’s mentioned that at full power (never seen in the anime), the Turn A can do things like warp its beam rifle shots into the cockpit of an opposing mobile suit and spread out its wings from Earth to Jupiter. In the Anime, it at least wiped out technology Earth-wide…
    I think the White Doll was best portrayed when doing more “mundane” mobile suit combat with Gundam Hammers, beam sabers, etc. That’s when the design really grew on me. The Zaku IIs (and a Zaku I, both called “Borjarnon”) were animated pretty well, too.

  3. lupes Says:

    MG Cow gundam is probably the toughest MG released by bandai yet….

    Turn A @ full power with NT pilot = most brokeass thing this side of the galaxy

  4. rndm Says:

    Turn A: YES! It’s final–
    Exia: Oh no you don’t!
    Turn A: Gack!
    Exia: It’s me turn! =D
    Turn A: >._>;

    Poor MG Turn A, neglected and pushed aside because the MG Exia is oh so much more desirable to build first. XD

  5. rndm Says:

    That’s weird, it was supposed to go; “Turn A: >__>;”

  6. ercjohn Says:

    @rndm
    turn a has a mole????
    Turn A: >._>;

  7. Zro Says:

    LAWLEXIA
    If this introduction post is any indication, this will be quite a project.

    And I’d like to think that it was the forming of a small teardrop at his being neglected.

  8. AceDudeyeah Says:

    I don’t like the Turn-A Gundam.
    I’d rather take a MG Ball.

  9. gunstray Says:

    Love it when the flyers of pixie dust fight to the death, LOL >=]

  10. Chris Says:

    lol Poor Turn A who’s being picked as the victim here.

  11. EXkurogane Says:

    lol… ‘Cow’ Gundam… I didn’t like turn A… Even if a friend gives one to me as a birthday present i’ll sell it off… *Ssshhhh!!!* lol…

  12. Noypi Says:

    I’ve bought both Exia MG’s and its just the same, only diff. is, the GN Drive Lights (you can fit the Ignition GN Drive to the Reg. EXIA MG, just remove the sticker inside), Metallic Coated swords and some little Repair parts (Eyes, broken fin, antenna etc, sword, cape etc.)

    Only thing that pisses me off is, you cannot build both Ignition & Repair head seperately, due to some parts of the repair head uses the parts of the ignition head, meaning if you want to display the repair you have to disassemble the ignition head and assemble the repair head again, but over all you just have to remove some outer parts to achive the repair mode.

    Just did the repair look last night, and did not build some of the parts (left arm), will finish the weapons later on, and do the decals (should i put the decals for the repair look?).

    Luckily, I both these to MG’s , so whenever I want to dispplay on Ignition mode, I just take the GN Drive from the Repair Exia and put it in the Normal MG Exia and just borrow the metallic swords and wallah!! Ignition Mode…hehehe

    Still have to finish the the weapons

  13. Chaosblade Says:

    Exia…

  14. CKai Cydek Says:

    Why all the Turn A hatred? It’s got to be the most original Gundam design ever made!

    And the engineering of the Master Grade is impressive – according to the manual, the MG design was done by Katoki, and he managed to make it pretty articulate despite the blocky limbs and stuff. Not to mention it’s the one MG that needs almost no paint whatsoever – just a pair of red dots on the legs.

    Although I admit, I am curious to see how Z treats his Ignition Mode Exia.

  15. tsukinari Says:

    lol… Turn A got pushed away by Exia >__<

    @Noypi – instead borrowing ignition parts into normal mode.. why not switch the repair parts into normal mode instead… that way.. u got all time Ignition Mode and Repair Mode :D

  16. tsukinari Says:

    yeah… why all the hatred towards Turn A… I like Turn A.. even his twin (Turn X :P) the design are quite unique… and I heard the articulation of Turn A pretty sweet.. u can pretty much pose like in anime :D

    Cant wait for ur building progress of MG Exia Z, hope mine fast arrive >_<

  17. acesan Says:

    That Exia is sexy. I would own it too, if it weren’t for the fact I’m going overseas shortly and no time or space build it / bring it.

  18. LagunaLoire Says:

    well…turn A is cool and all…
    the only thing i can’t stand is the actual ‘cockpit’ location…get it? ><

  19. Paliodor Says:

    Turn A, Turn A Gundam yeah!
    To bad that you don’t work on this kit first but still Exia is also nice MG. Good luck ^^

  20. pOng Says:

    wahahhaha.. i wanna see exia too!!! i have been leaving my MG Exia untouched too.. jus wanna see how Z reviews it… and i will be practicing my painting on the OYW Gundam first before i paint EXIAAA….

    Ore wa… GANDAMU DA.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 142 other followers