Since its first appearance, the Astray Red Frame has always been one of my top favorite Gundam designs. It is stylish, unique, functional in unorthodox ways, and most importantly… it favors wielding a katana (or its pilot does anyway). “Astray” is a fitting name because the series and the Gundam designs itself are so far off (see: better) from the mainstream SEED stuff that it is sometimes hard to believe both are in the same universe.
The original 1/100 Red Frame was held in pretty high regards due to its awesome articulations and poseability, and many people likened it to be on the same level as Master Grade models at the time. Now that there is a real Master Grade of the Red Frame, it is not unreasonable to have high expectations of it since it will certainly surpass the the original much-loved Red Frame. So let’s see…
OUT OF THE BOX
28 runners in total (most are small), decals and clear stickers that looks more like graffiti than anything else, special action base 2 included for Tactical Arms, chrome blades for the you-know-what and crap-colored parts, manual, and clear parts for the crotch area that no one should care about.
BODY UNIT
Why is the part around the cockpit the only white part on the body? Anyway, Loads of little parts that stack on top of one another until you form something that looks like a body. Due to the way it is assembled, do pray that you don’t have to disassemble it because… it is very hard and it is a long tedious process to remove each little piece part by part. I had to take it apart to tighten the shoulder joints so it doesn’t sag when I lift up the arms.
ARM UNITS
Assembly was a breeze for the most part but… painting the fingers is not. Separated the fingers into individual digits with my modeling knife before I paint them as it seems to be easier that way.
LEG UNITS
Oh how much I hated working on this area. The parts, as you can see, are tiny and abundant. Topcoating this part is also a nightmare because it has like over 50 surface areas and slights, indents, gaps, and such here and there that makes it hard to get an even coat. Notice that on each side of the lower leg there is a rectangular peg slot… makes me wonder if Bandai has something planned for the Astray Frames in the future. C’mon MARS JACKET!!!
WAIST UNIT
Nothing much going on here… it is as simple as it looks.
HEAD UNIT
Compared to its 1/100 counterpart, the MG model is a lot sleeker and has more details. Even though the clear part for the forehead comes in a clear green, I painted it anyway because it wasn’t dark enough. The v-fin sits almost kinda loose…
TACTICAL ARMS IIL
Build just like MG Blue Frame’s TA but with some slightly different parts for Red Frame’s own unique forms. All the parts to convert to the Blue Frame’s TA are included though (minus the beam effect parts for it).
ACTION BASE
Just slap the parts together and get it over with.
GERBERA STRAIGHT/TIGER PIERCE
No explanation needed. This is the main reason why I bought the Red Frame.
THE GOLD
For the Gerbera Straight and Tiger Pierce’s handles and scabbards, I decided to pass on Tamiya Gold Leaf and use this Gundam marker instead. The color is like…well, however you see it in this review whereas the Gold Leaf was a bit of a dark bronze and I didn’t think that matched well with the white and red. Do not ask me for the code/paint number of this gold marker because I will not tell you. WARNING: The gold marker’s paint has a magical chipping property though. It is not as resistant as well paint and it grinds off easier. To top it off, I think it also fades quicker too… I had to apply several layers over and over to preserve its luster >_>.
STRAIGHT BUILD
Yeaa… without decals and top coat, it doesn’t really look like much… ^^;
COMPLETED MODEL- SWORD FORM
NOW that’s something. Unless you have the waterslide decals, I say you can pretty much forget about applying most of the markings. Most of the markings are applied through multiple surfaces, across panel lines, and tight spaces so it makes things rather difficult. I just applied the stuff wherever I see fit.
While the TA might be dreadfully heavy, it can support the Red Frame with standing in this form since the tip can touch the ground.
A closer look at the various details throughout the Gundam’s body.
DELTA FORM
The first of the few admittedly useless (model-wise) forms the TA on its back takes on.
The form looks a bit out of place for my taste so I didn’t bother posing with it. This also makes the model incredibly top AND back heavy… hence the use of my Hasegawa base to keep it standing.
So maybe it can stand by itself for just a bit…
V FORM
The second form… all you do is fold down the “claws” into a V and change the directions of the “arrows” on the bottom and you’re done!
What I said about the Delta Form applies here as well.
FLIGHT FORM
Turn the V Form upside down and you get Flight Form :D. I thought this would be similar to the Blue Frame’s setup but…
I didn’t think it would sit so low… so low that it looks kinda awkward with it. Well, at least the handle on the TA can help the Red Frame stand against all that weight on its rear.
The proper way to display the Gundam in this form is to impale it on its action base or whatever to hold it up.
CUSTOM FORM
The above is the ORIGINAL kitbash that I came up with… like a good year before this MG Red Frame was even realized. Bandai took my idea… xD
Now in MG glory.
The original Flight Form…
has also been faithfully reproduced.
RED VS BLUE
Blue is only ever so slightly taller. Process-by-process, step-for-step, these two are just about 100% the exact same model with one obvious difference (Bandai marketing at its greatest). I’ll say it now… do not build these two one after another.
Head
Shoulder
Foot
Back
Now we can finally move on to the action…
ACTION!
One thing I wish they include was a palm/effect part for Red Frame’s “Shining Finger” attack.
The Red Frame is truly a Super Robot misplaced inside a Real world.
BEAM TORCH
No… it’s not a beam rifle nor is it a beam saber. It’s a TORCH… a beam torch at that. Flame torches are sooo outdated by this time apparently (and I’m guessing it wouldn’t work in outer space). Leave it to Lowe to have some of the most unconventional conventional weapons(?) at his disposal.
Can’t help but to pose it like a beam rifle though ^^;.
ARROW FORM
RISING ARROWWW!!! Yet another one of the TA’s many forms and yet another unconventional weapon of Lowe’s because regular beam rifles just aren’t cool enough. When was the last time you saw a Gundam using arrows since Rising Gundam?
Unfortunately, the TA Arrow is a bit too heavy for the hands to hold it in that position, rendering the need to use an action base to prop it up. While it looks really badass, it is very hard to get a good angle from it since it is so big.
PINCER FORM
Guess Lowe also took a page out of Kyrios’ construction manual. Claw… Crusher… Pincer… whatever you like to call it. Only Lowe would build something that looks this intimidating and relegate it to construction duty.
With your pincer, crush the heavens!!… or something.
TACTICAL ARMS SWAP
Noticed anything different about the TA?
Parts swapped from Blue Frame’s TA for the Gatling mode.Note: the ammo pack is not included with the Red Frame. I supposed there is some merits to owning both Frames…
pewpewpew. It can also form the Sword Arms too but didn’t know where I put the beam effect parts ^^;.
GERBERA STRAIGHT
THIS is it! THIS is where the Red Frame shines! THIS is what the Red Frame is about!
Ditch everything else and stick to the basics.
I wish a dedicated hand was included to hold the scabbard just like the 1/100 did. Well, the tip of it can plug into the palm so I guess that works too.
I’ll admit… for some reason, it was kinda hard figuring out how to pose with the GS until I warmed up to it.
Elegant. Efficient. Effective. Effin’ awesome.
Wish the head could tilt up some more in this pose but this is like my favorite shot in this review ^^
This was also the hardest pose to take a good shot of. I had to retake it several times before I was satisfied with the result.
A pose I took from the manual. This is one way to demonstrate Red Frame’s articulation ^^
Posing straight proves to be a little more difficult with that giant thing strapped to its back though.
TIGER PIERCE
Dual wield!
Oh so shiny…
fingerprints are unavoidable though… unless you wear gloves.
Ha! My setup works better than the rest since it can actually support Red Frame in wide stances! Not to mention it looks better…
斬!
Taking flight…
The Red Frame looks good in aerial poses too!
PROS AND CONS
Positives
- Gorgeous, sleek rendition of a great design; lean and muscular without being anorexic; this model does the Gundam justice.
- wide range of unobstructed motion and articulation; great poseability
- Feels like it has more of a solid stance than the Blue Frame.
- Very versatile Tactical Arms… even if most forms are meaningless for the model.
- Red Frame looks just as great without the Tactical Arms
- Gerbera Straight and Tiger Pierce
- In some situation, the Tactical Arms can actually help with posing.
Negatives
- No original backpack… though after this review, it’s really no big deal.
- V-fin is fragile and easy to knock off… I almost want to suggest gluing it.
- Topcoating this model was a PITA
- The shoulder joints aren’t as strong as I would like them to be (they sag when the hands are holding a weapon). I had to increase the friction on the joints by letting krazy glue dry on it.
- Tactical Arms is too heavy to be of any viable use; I think this TA is heavier than Blue Frame’s since it has some extra bits… for something of this size, I think that little bit amount of mass counts (Blue already has delicate balancing with his as is).
VERDICT
And there you have it… the long-awaited-for Master Grade Gundam Astray Red Frame Kai. Now I can put away my old 1/100 Red Frame. This model undoubtedly bests its original 1/100 counterpart in every way and the more subjective stuff are up to personal preference. By itself, I think this is a very playable model after completion as it can hold poses extremely well with little to no problem. Not to mention you have quite a unique assortment of armaments to mess around with compared to the standard “beam rifle and saber” setup. Having the Blue Frame can only enhance the play value of Red Frame. What I’m saying is… there shouldn’t be any reason to question whether you should pick this model up or not ^^.
OTHERS’ REVIEW:
PART 2- DUEL
“Ah man… just where did I put it… At this rate, I’ll never be able to find it!” *beep beep* “hm?”
“SURPRISE BUTTSECKS!! Incoming attack from the rear, Lowe!”
“HA?! No matter how you put it, that sounds kinda wrong, 8!”
“RED FRAME! LOWE GUELE!”
“Today! I will have my revenge!”
“Guess it’s hard to be famous…”
“Guess I have no choice huh… but I want that backpack! Let’s do it, 8!” “ROGER!”
“ATTACK RIDE: SWORD FORM!”
”行くぜ!行くぜ!行くぜ!”
“What power…! Why… someone so little… like you! A Natural!!!”
“Then behold my NATURAL Power!”
“BASTARD!”
“It’s not over yet! I still have THIS!”
“Wait… that can’t be it…that’s the… that’s the… GERBERA CROOKED!”
“Be careful, Lowe! That blade is said to be able to cut even general unsubdued nuclear drive assault modules!
“No time to be worrying about that now! He’s coming!”
“DIE!!!”
*Tosses away the Tactical Arms* “Katana vs katana… GERBERA STRAIGHT!”
“HYAAAA!!!”
“RWARRR!!!”
!!!!!!!!!!!
*Blades clashing*
“How persistent… TIGER PIERCE!”
“RAHH!!”
“Had enough?”
“NEVER!!!”
“I”ll destroy you with my BARE HANDS!”
“But… you don’t have any hands left… Whatever. 8! Recall the Tactical Arms!”
“ROGER!”
“FINAL FORM RIDE: A-A-A-ASTRAY!”
“Pincer! GO!”
“UGH! LET GO!”
“LO-LO-LO-LOWE GUELE!”
“Let’s finish this! 8! Route all the battery’s energy to the right foot! I want to try something new…”
“That’s dangerous, Lowe! The Red Frame’s leg might get destro–”
“8! WHO THE HELL DO YOU THINK I AM?! I AM LOWE THE JUNKER! WALKING THE PATH OF—”
“Alright! Don’t blame me if we end up in the junkyard!” “Don’t interrupt my speech!”
“FULL CHARGE! NOW, LOWE!” “LET’S DO IT!” “FINAL ATTACK RIDE: A-A-A-ASTRAY!”
“… Will you cut that out?”
“What are you doing?!” “HISSATSU! ORE NO HISSATSU WAZA!”
ASTRAY KICKKKKK!!!!!!
!!!!!!!!!!!
“What’s happening?!”
“STOPPPPPPP!!!”
“TORYAAAAAHH!!!”
“ARRRRGGHHHHHHHHHHHHHHHHHHHH!”
“You really overdid it this time…”
“This is how the Junk Guild rolls…”
“Lowe… we’re out of power”
“… … oh crap ^^;”
*FEW HOURS LATER*
“…?!”
“RAWRRRR!”
“!!!!!!”
“RAAAHHHH!!!!!”
“LOOWWWWWWWWEE GUUUUUUUEEELLEEEEEEEEEEEEE!!!”
“… …”





















































































































































































































A's Toy Box
Akamage
American Salary Man
An Army of Zakus
Baby TheEnd's Gunpla and Toy Review
BD77's of Figure & Plamos
Beamknight87's Blog
Celestial Preventer
Chessboard Attic
DC23 Mech Arts
EM Creations
Eyeshield30's Blog
FigurativelyGunpla
Gaijin Gunpla
Gundam Australia Forum
Gundam Model Kit n Figures
Gundamgazette
Gunota.Info
Hobby Hovel
Lupes' Blog
Machenix Mechas
Memoirs of a Blur Sotong
My Gundam Harem
Plamo Addiction
Random Stuff from the East
Rock Lee's Lotus
Studio OZKai
Tonythem's Hobby Corner
August 31, 2010 at 12:32 AM
you may have just turned me onto the mg red frame! i kinda wish it had the orginal rifle and backpack tho. i dont really need all the extras. proportion wise i think ive warmed up to it. great review!
August 31, 2010 at 11:14 AM
Thanks!
Yea… but isn’t the rifle the same as the Strike’s or really similar? You can re-use your MG Impulse’s or the old 1/100 one and I think it’ll work ^^;.
September 1, 2010 at 2:16 AM
Hey Z,
Can you take a picture of the back of the Red Frame with the blue frame TA (using the extra pieces that come with the Red Frame) in the blue frame’s flight mode? I was curious as to how that looked.
Thanks in advance =]
September 2, 2010 at 6:26 PM
Maybe when I get around to this model again.
September 1, 2010 at 4:44 PM
I’m gonna get a fine point marker, Is that enough as far as panel lines?
September 2, 2010 at 6:26 PM
plenty
September 5, 2010 at 7:48 PM
Thanks! Its not everyday that i get advice from a mg pro.
September 3, 2010 at 10:38 PM
Heehee :3
I have the original backpack for Red Frame. Definitely gonna attack it with my MG one, if I ever get it.
But my beam sabers are missing…
September 5, 2010 at 7:24 AM
I think what I might do for the gold is simply buy Rustolium Gold Spray paint and jsut apply that to the runner.
September 12, 2010 at 2:18 PM
[...] here is the project I’ve been working on for the past week. After seeing Z’s Red Frame which he completed not too long ago I convinced myself to nab one for myself and have an attempt at [...]
September 14, 2010 at 2:53 AM
LOL. ot Decade attack’s slang in the story. Should get the card from it’s opponent back then. Love that part so much
Anyway nice review on Astray.
*seeking the money in wallet* T.T
September 23, 2010 at 5:59 AM
I wish you could put like a sneak peek of the next perfect grade you’re going to do in your postT_T.Its killing me to know whether getting this is any better or getting perfect grade gundam astray.
October 24, 2010 at 8:14 AM
Hi Z,
This was a nice review and the pictures were great. In fact it finalized my decision in buying this model.
I ‘ll start to build my MG Astray Red Frame 30th Anniv. next weekend. I would like to ask which part of the model you put paint and detailed?
Thanks in Advance…
November 3, 2010 at 7:13 PM
how did you paint the fingers? im currently building the red frame fight now but was wondering if i should use gundam marker, enamel/acrylic hand paint, or spray paint? if handpainting, do you prefer acylic or enamel? THX I LOVE YOUR BLOG!! :D
November 17, 2010 at 2:18 PM
Hey Z
Love your reviews….best ones online IMO. Your reviews for the most part help me decide on which MG to get next since you do such a great job with pics and reviews. I was wondering which kit you like better as a display piece: This Red Astray or the Exia. Can’t figure out which one to get next and looking for your opinion on which one would be a better display kit.
Keep up the great work!
November 17, 2010 at 2:46 PM
Hey thanks for the compliment ^^. I think the Red Frame is the better display out of the two, out of aesthetics and stability. Exia isn’t as stable as I would like it to me while the Red Frame can hold a standing pose confidently… to be displayed.
November 17, 2010 at 3:44 PM
Awesome. I love both suits…..can’t get better than Gundams with lots of swords, but was on the fence with which one for christmas, lol. I’ll go with the Red Frame then, especially since stability would be a big deal to me. Thanks for the help!
December 24, 2010 at 10:06 AM
Z, does Bandai have waterslide decals for MG Red Frame Kai? I can’t find anything on the internet. Thanks!
December 24, 2010 at 7:56 PM
apparently they don’t. I never checked but you can try Samuel Decals and see if they have a custom decal set.
December 26, 2010 at 2:32 PM
I just finished building my Red Frame and it was almost as bad a building Strike Freedom’s wings, regadless though it looks great.
January 18, 2011 at 3:22 PM
nice review. . . the shoulder armor tends to wobble – what do u suggest to have it perfectly alligned with the shoulder joint. . .
January 20, 2011 at 5:44 PM
Wow.. Nice one. Thanks
January 25, 2011 at 6:27 AM
Hi Z!
Cool pictures!
I’ve been having this gundam forsome time, and this is my first MG and Gundam model ever. This model is very cool, and i had great time building it! So, after playing with it for a while I’ve foung some defects like fragile antenna (had to glue it) and half-broken leg joint (waiting till it is fully broken to glue it :P), but the worst thing is the fragile thumbs.When i pose it i firstly pose the gundam itself and then attach thumbs and sheathes. Can you recommend me something to do with it? Also, is it a common problem for all MGs (i mean thumbs and leg joints)? Does you topcoating ballons present on HLJ (could not find them)?
Waiting for your answer
And sorry for so many words and questions^^
February 26, 2011 at 10:16 AM
Z?
February 26, 2011 at 9:00 PM
My bad… must’ve missed this comment.
so what you’re trying to say is that your thumb is flying off the hand? That is sadly a regular occurrence in MG models but not a common one. Not sure if there really is a solution to it other than just being careful. I know my Blue Frame does it sometimes if I’m not careful enough with the hands but I don’t mind it. If you want, you can try painting the ball joint on the thumb so there is more friction between it and the socket.
and I don’t understand your last question ^^;.
February 27, 2011 at 12:22 AM
Thanks for answering. Sorry for my hard-to-understand English, im still learning it. With my last question i was trying to say that i failed to find any topcoating paint on HLJ, and neither on hobbysearch.
February 27, 2011 at 12:30 AM
Oh. Japanese online stores don’t carry them anymore that’s why you can’t find them.
February 2, 2011 at 6:14 PM
does this model have the, sword ar…err blade tonfa ^^
February 20, 2011 at 7:47 PM
You can assemble it as such, yes.
May 9, 2011 at 8:58 AM
do you know were can I get the manual for the blade tonfa assembly?
February 20, 2011 at 3:34 AM
Did you get the waterslide decals for this kit or are the ones in you pictures the ones that are included?
February 20, 2011 at 7:46 PM
Just used what was included.
February 22, 2011 at 1:44 AM
hi there!!!just finish my red frame this afternoon.lol.just want to ask what do you use in painting the fingers of your red frame.i really want to make my red frame look like yours.pls do reply.thanks a lot.
February 22, 2011 at 1:31 PM
any white paint with a fine brush or a white gundam marker will do.
February 24, 2011 at 9:25 PM
Still debating on getting this, the MG ReZel, or MG Ground Gundam…
Sadly I’m leaning much more toward the Ground Gundam. It may be old and plain, but I’ve become a HUGE fan of it after watching 08th MS Team…
DAMnit, why can’t I get more than one MG for my birthday?! D:
February 25, 2011 at 1:11 AM
You can always use your geass on the store owner to give you their inventory…
February 25, 2011 at 6:45 PM
LOLL nice idea!
Lelouch Vi Britannia commands you…I DEMAND ONE OF EACH!
*Geass hawk flies into eye*
“That’ll be 15,000,000,000 yen.”
EHHHH?!
“You never said “free.” xD